EasyAccess Solutions
Roof Access Systems & Walkways

LIGHTWEIGHT, STRONG & MODULAR ROOFTOP ACCESS SYSTEMS

Best Aluminium Roof Walkway Systems in Australia

Standard Walk Way One Side e1637620244461

STANDARD WALKWAY

LEVELLED WALKWAY

Standard Walk Way One Side e1637620244461
Standard Walk Way Two Side e1637620635633

GUARDRAILS

EasyAccess Walkway & Guardrails FAQs

The Con-form Group walkway solutions are prefabricated with 6063-T6 grade aluminium components and 13mm knurled expanded aluminium mesh.

Standard Walkways are used when the roof pitch is between 0-7 degrees. Any roof pitch higher than 7 degrees, our Levelled Walkway system must be used,

It all depends on the pitch of the roof and the location of the walkway. Our team will be able to help you understand where and when you will require Guardrails on a Walkway. Send through your enquire &/or plans here.

Our 13mm knurled mesh procides approximately a 72% open area.

AS/NZS1170, and AS1657 & Relevant Clauses of the Building Code of Australia.

Whichever procudes the worst scenarie of 2.5kPa UDL and 1.1kN point load anywhere on the walkway.

” Guardrails are required anytime a traffic on walkways are at risk of tripping or falling. The goal of Guardrails/Handrails is to prevent the possibility of falls that could cause serious injury.

The team at Con-form Group are experts at what they do. We can help you determine when and where a guardrail will be required.

CHECK OUT OUR OTHER SOLUTIONS