All your questions answered
The complete Con-form Group product range is backed by a 25-year warranty.
As there are so many varied units with different mounting configurations, our certification does not cover this aspect, hence we do not provide fixings for air-con units – our recommendation is to bolt the units down to the mesh (with a piece of AVANT Anti-Vibration, Anti-Noise Technology pad between them) using a plate with a hole in it, below the mesh or to bolt through the mesh and cross beam, if the mounting foot of the units is directly above it.
If the complete platform is required on the roof in one package, a crane would be required – the alternative is to cut the package open and carry the individual parts up.
A 13mm spanner which is supplied with the fixings, a drill and a tek driver.
A 3m x 3m platform would take one person 2 hours at their first attempt.
The square meter size of the platform x 250Kg – providing the weight is centralised on the platform – the structural design of the platform ensures that a centrally located weight on the platform is evenly distributed over the footprint size of the platform.
Total weight (combined) of Platform, Screens, Louvers etc (*²Refer to weights below), plus any plant equipment (platform area in m² x weight of platform) + weight of plant equipment)/ platform area in m²
Example of a typical scenario:
6 m x 6 m EasyMech MR platform, with 2000 kg unit:
Platform = 36m²
Platform weight = 14 Kg/ m² @ 3 Degrees
(36 x 14)+2000)/36 = 70kg per m²
Con-form Group has developed two types of HVACR platform systems, the purlin-mount EasyMech platforms and the rafter-mounted Span+ platform.
The purlin mounted EasyMech MR & CR are 100% penetration-free. They are secured to roofs as according to AS1170.4, with our seismic clip fixings which are suitable for all metal deck roof profiles.
The rafter-mounted Span+ system is the superior & lightweight replacement for traditional structural steel platform decks. Our patented, stub columns penetrate the roof membrane and fix securely to the rafter.
In order to get a price on one of our HVAC / Mechanical Plant Platforms, we need some information. If you’re looking for DIY Solution, head on over to our shop, where you can purchase our off-the-shelf solutions.
For a custom job, we need to know the roof pitch in degrees and the approximate size of the platform required (in 600mm increment sizes). Or provide us with information on the size of the unit that will be installed and where the access panels are on the unit (if space is required on these sides to provide for maintenance access), and we can provide you with a quote.